AdapterID 05FF8h AdapterName "PLUS PASSPORT MC ADAPTER BOARD" NumBytes 2 fixedresources pos[1]=X0XXXXXXb pos[0]=XXX0XX0Xb nameditem Prompt "BIOS Address" Choice "Address DC00:0" pos[0]=111XXXXXb mem 0dc000h-0dffffh Choice "Address D800:0" pos[0]=110XXXXXb mem 0d8000h-0dbfffh Choice "Address D400:0" pos[0]=101XXXXXb mem 0d4000h-0d7fffh Choice "Address D000:0" pos[0]=100XXXXXb mem 0d0000h-0d3fffh Choice "Address CC00:0" pos[0]=011XXXXXb mem 0cc000h-0cffffh Choice "Address C800:0" pos[0]=010XXXXXb mem 0c8000h-0cbfffh Help "To configure this adapter, you must choose the memory address range the adapter will use for its BIOS ROM. There are six memory address ranges that can be selected. Under normal conditions, choose [Address DC00:0]. In order for the adapter to work properly, the address chosen must be higher than any other non-Passport hard disk adapter installed in your system. When there is more than one Passport MC Adapter installed, the adapter in the lowest slot number will be the first adapter, and therefore, base housing 1 is attached to it." nameditem Prompt "I/O Port Address" Choice "Addresses F320-F323" pos[0]=XXXX11XXb io 0F320h-0F323h Choice "Addresses F324-F327" pos[0]=XXXX10XXb io 0F324h-0F327h Choice "Addresses F328-F32B" pos[0]=XXXX01XXb io 0F328h-0F32Bh Choice "Addresses F32C-F32F" pos[0]=XXXX00XXb io 0F32Ch-0F32Fh Help "To configure this adapter, you must choose the I/O address range the adapter will use. There are four I/O address ranges that can be selected. Under normal conditions, choose [Addresses F320-F323]." nameditem Prompt "DMA Channel" Choice "Channel 3" pos[1]=XXXX0011b arb 3 Choice "Channel 5" pos[1]=XXXX0101b arb 5 Choice "Channel 6" pos[1]=XXXX0110b arb 6 Choice "Channel 7" pos[1]=XXXX0111b arb 7 Choice "Channel 8" pos[1]=XXXX1000b arb 8 Choice "Channel 9" pos[1]=XXXX1001b arb 9 Choice "Channel 10" pos[1]=XXXX1010b arb 10 Choice "Channel 11" pos[1]=XXXX1011b arb 11 Choice "Channel 12" pos[1]=XXXX1100b arb 12 Choice "Channel 13" pos[1]=XXXX1101b arb 13 Choice "Channel 14" pos[1]=XXXX1110b arb 14 Choice "Channel 4" pos[1]=XXXX0100b arb 4 Help "To configure this adapter, you must choose the DMA channel the adapter will use to transfer data. Under normal circumstances, select [Channel 3] unless this conflicts with another option. If it does conflict, select the next highest-numbered channel." nameditem Prompt "Fairness On/Off" Choice "On" pos[1]=XXX1XXXXb Choice "Off" pos[1]=XXX0XXXXb Help "Under normal circumstances, select [On]." nameditem Prompt "DMA Burst" Choice "On" pos[1]=0XXXXXXXb Choice "Off" pos[1]=1XXXXXXXb Help "Under normal circumstances, select [On]. This will give the highest performance. It is possible that some programs or adapters will not work with Passport in burst mode. In these cases it will be necessary to select [Off]." nameditem Prompt "Interrupt Level" Choice "Level 14" pos[1]=XX1XXXXXb Choice "Level 5" pos[1]=XX0XXXXXb Help "To configure this adapter, you must choose which interrupt line the adapter will use to communicate with the system's microprocessor. Under normal circumstances, select [Level 14]. Multiple options may share the same interrupt level."