AdapterId 06B80h AdapterName "Dataflex Design MCA Professional Modem (ADF1.2)" Numbytes 4 Fixedresources pos[3]=1XXXXXXXb NamedItem Prompt "Async Communications Port" choice "SERIAL_1" pos[0]=XXX1000Xb io 03f8h-03ffh int 4 choice "SERIAL_2" pos[0]=XXX0000Xb io 02f8h-02ffh int 3 choice "SERIAL_3" pos[0]=XXX0001Xb io 3220h-3227h int 3 choice "SERIAL_4" pos[0]=XXX0010Xb io 3228h-322fh int 3 choice "SERIAL_5" pos[0]=XXX0011Xb io 4220h-4227h int 3 choice "SERIAL_6" pos[0]=XXX0100Xb io 4228h-422fh int 3 choice "SERIAL_7" pos[0]=XXX0101Xb io 5220h-5227h int 3 choice "SERIAL_8" pos[0]=XXX0110Xb io 5228h-522fh int 3 choice "COM_3" pos[0]=XXX1001Xb io 03e8h-03efh int 4 choice "COM_4" pos[0]=XXX0111Xb io 02e8h-02efh int 3 Help " SERIAL_1 i/o address 03f8h-03ffh interrupt level 4 SERIAL_2 i/o address 02f8h-02ffh interrupt level 3 SERIAL_3 i/o address 3220h-3227h interrupt level 3 SERIAL_4 i/o address 3228h-322fh interrupt level 3 SERIAL_5 i/o address 4220h-4227h interrupt level 3 SERIAL_6 i/o address 4228h-422fh interrupt level 3 SERIAL_7 i/o address 5220h-5227h interrupt level 3 SERIAL_8 i/o address 5228h-522fh interrupt level 3 COM____3 i/o address 03e8h-03efh interrupt level 4 COM____4 i/o address 02e8h-02efh interrupt level 3 .... This modem's Async port can be assigned to any of the above serial ports, providing that the port selected has not been previously assigned. Conflicts are indicated by an asterisk and must be changed." NamedItem Prompt "Sync Communications Port Base Address" choice "0380h" pos[2]=001XXXXXb io 0380h-038ch choice "0280h" pos[2]=000XXXXXb io 0280h-028ch Help "[0380h] selects i/o address 0380h-038ch, [0280h] selects i/o address 0280h-028ch for the synchronous port. Conflicts are indicated by an asterisk and must be changed." NamedItem Prompt "Sync Communications Port IRQ Line" choice "IRQ_3" pos[2]=XXX0XXXXb int 3 choice "IRQ_4" pos[2]=XXX1XXXXb int 4 Help "[IRQ_3] selects interrupt level 3 or [IRQ_4] selects interrupt level 4 for the synchronous port." NamedItem Prompt "Sync Receive Clock Polarity is" choice "POSITIVE" pos[0]=0XXXXXXXb choice "NEGATIVE" pos[0]=1XXXXXXXb Help "[POSITIVE] selects data valid on the positive edge of the receive clock or [NEGATIVE] selects data valid on the negative edge of the receive clock." NamedItem Prompt "Sync Transmit Clock Source_Polarity is" choice "INTERNAL_POSITIVE" pos[0]=X0XXXXXXb pos[1]=XXX01XXXb choice "INTERNAL_NEGATIVE" pos[0]=X1XXXXXXb pos[1]=XXX01XXXb choice "EXTERNAL_POSITIVE" pos[0]=XX0XXXXXb pos[1]=XXX10XXXb choice "EXTERNAL_NEGATIVE" pos[0]=XX1XXXXXb pos[1]=XXX10XXXb Help "[INT_POS] selects data sampled on the positive edge of the modem's internal transmit clock. [INT_NEG] selects data sampled on the negative edge of the modem's internal transmit clock. [EXT_POS] selects transmit data sampled on the positive edge of the external clock. [EXT_NEG] selects transmit data sampled on the negative edge of the external clock." NamedItem Prompt "Parallel Bell Suppression is" choice "On " pos[1]=X1XXXXXXb choice "Off" pos[1]=X0XXXXXXb Help "[On] will suppress the bell of a parallel telephone when the modem is dialing. [Off] will not suppress the bell, which may cause the telepone to TINKLE when the modem is dialing." NamedItem Prompt "Default on Power up to" Choice "Async" pos[1]=XXXXXXX0b Choice "Sync" pos[1]=XXXXXXX1b Help "[Async] will set the modem to power up in Asynchronous mode. [Sync] will set it to power up in DATAFLEX synchronous mode." NamedItem Prompt "Default on Power up with Autoanswer" Choice "Off" pos[1]=XXXXXX0Xb Choice "On" pos[1]=XXXXXX1Xb Help "[Off] will set the modem to power up with Autoanswer Off. [On] will set the modem to power up with Autoanswer On." NamedItem Prompt "Default Command Set on Power up is" Choice "Hayes" pos[1]=XXXXX0XXb Choice "V25BIS" pos[1]=XXXXX1XXb Help "[Hayes] will set the modem to power up to use the HAYES AT command set. [V25BIS] will set the modem to power up to use the V25BIS command set."